Your privacy is very important to us. When you visit our website, please agree to the use of all cookies. For more information about personal data processing, please go to Privacy Policy

C&I FAQ

H3 Plus Power Beast FAQ

Commercial energy storage for North America

Answers for customers, installers and project partners evaluating H3 Plus with CQ7 batteries. Model selection, battery sizing and site conditions determine the final system configuration. This FAQ supports product selection and does not replace the installation manual.


System overview

1. What is H3 Plus Power Beast?

H3 Plus Power Beast is a three-phase commercial energy storage solution combining an H3 Plus hybrid inverter with modular CQ7 lithium iron phosphate batteries. It supports solar self-consumption, peak shaving, demand control, backup power and off-grid applications.

2. Which model should I choose?

Select the voltage family to match the site electrical service, then size inverter power and battery capacity to the load profile and backup requirement. The model families and maximum CQ7 capacities are shown below.

Voltage family

Inverter power options

Maximum CQ7 capacity

208 V three-phase

37.5 / 50 / 60 / 70 kW

250.92 kWh per inverter

480 V three-phase

80 / 100 / 125 / 150 kW

292.74 kWh per inverter

3. Can a 208 V model be converted to 480 V?

No. The 208 V and 480 V inverters are different models and cannot be converted into one another. Confirm the site voltage before ordering.

4. Can H3 Plus operate with solar only?

Yes. In PV-only operation, H3 Plus functions as a grid-tied solar inverter. The off-grid function must be disabled, and backup power is not available without a suitable battery configuration.


Solar and energy management

5. How much solar can be connected?

The product range supports PV array sizing up to twice the inverter rated power. For example, the 150 kW model supports up to 300 kW of PV nameplate capacity. Array design must also remain within the model-specific voltage, current and string limits.

6. How many MPPTs are available?

The 37.5 kW and 50 kW models have four MPPTs. The 60 kW through 150 kW models have eight MPPTs. Each MPPT supports two PV strings. The PV input specification is 40 A input current and 50 A short-circuit current per MPPT; use the selected model’s installation manual for final string design.

7. What are the MPPT voltage ranges?

The stated MPPT range is 180–700 V for the 208 V family and 180–950 V for the 480 V family. An MPPT operating range is not the same as a maximum allowable PV open-circuit voltage; confirm cold-weather string voltage against the installation manual.

8. Can the system work with existing solar?

H3 Plus supports both AC-coupled and DC-coupled applications. Existing solar inverter compatibility, metering and control settings require project review, particularly where solar must operate during a utility outage.

9. How can H3 Plus help manage energy costs?

The system supports self-consumption, peak shaving and demand control through Fox Cloud 2.0 and its energy management functions. The financial benefit depends on the electricity tariff, site load profile, solar generation and operating settings; savings are not a fixed product specification.

10. Which rapid shutdown devices are supported?

Supported brands include APS, NEP, Advansol, Tigo and Fonrich. Confirm the exact device model and approved system arrangement with Fox ESS before procurement; a brand listing does not mean every product from that brand is compatible.

11. Regarding the issue of bypass current when multiple H3plus units are connected in parallel.

When multiple stages are connected in parallel, the bypass current is evenly distributed, but the magnitude of the bypass current does not equal the actual power dax of the inverter.


Battery capacity and performance

12. What battery does this FAQ cover?

This FAQ covers CQ7 batteries, using lithium iron phosphate (LFP) cells. Each module has a nominal capacity of 6.97 kWh, often described commercially as 7 kWh. Capacity figures in this document use 6.97 kWh per module.

13. How much battery storage can one inverter support?

H3 Plus provides three independent battery-string inputs. The 208 V family supports up to 12 CQ7 modules per string, or 36 modules and 250.92 kWh per inverter. The 480 V family supports up to 14 modules per string, or 42 modules and 292.74 kWh per inverter. These are nominal energy capacities, not guaranteed usable AC energy.

14. How are battery strings configured?

Each populated string uses one CM master battery and the required CS slave batteries. Three populated strings require three CM units. Follow the approved string configuration and module-count requirements; battery sizing also determines available charge and discharge power.

15. Does H3 Plus support black start?

Yes. The minimum configuration is four CQ7 modules connected in series to reach black-start voltage. That minimum configuration provides approximately 13 kW of battery-side output. Black-start capability does not mean the inverter can deliver its full rated power from four modules; confirm sizing for the selected model and loads.

16. Does CQ7 support cold-weather operation?

Yes. CQ7 includes integrated battery heating. The operating temperature range is −25°C to 55°C (−13°F to 131°F). Charging and discharging remain subject to battery temperature, heating status and BMS controls; this range is not a full-power guarantee at every temperature.

17. What cycle life and efficiency are specified?

CQ7 has a specified battery round-trip efficiency of at least 95% and a cycle life of approximately 6,000 cycles. A specified test condition gives 6,150 cycles to 70% state of health at 25°C, 90% depth of discharge and 0.5C charge/discharge. These are test-condition figures, not a warranty term or a whole-system AC efficiency guarantee.

18.In what kind of environment is it better to install the CQ7 battery?

It can be used in a well-ventilated outdoor environment. The battery casing of CQ7 is made of aluminum alloy and has good thermal conductivity.


Backup power and generators

19. How many inverters can operate together for backup?

The current North American configuration covered here supports up to five H3 Plus inverters in parallel for backup/off-grid operation. Ask Fox ESS to review the project before specifying a larger system. A larger grid-tied parallel limit must not be interpreted as the backup limit.

20. How fast does the system switch during a grid event?

H3 Plus supports automatic transitions between supported operating modes. Transfer performance depends on the configuration and direction of transfer. Obtain the approved transfer specification for the selected system before specifying a sensitive load or an uninterrupted-power requirement.

21. Can H3 Plus power motors and unbalanced loads?

The product supports unbalanced three-phase loads within its per-phase and wiring limits. Motor starting must be checked against inverter surge capability and the actual starting current. Provide the motor nameplate, starting method and simultaneous loads to Fox ESS; a VFD or soft starter can affect the required system size.

22. Can H3 Plus connect to a diesel generator?

Yes. The standard arrangement supports a compatible three-phase generator and SOC-based start control. Generator capacity, voltage, wiring, control signals and operating settings must be reviewed for the project. Do not assume a single-phase generator is a direct substitute.

23. Can a parallel system connect to multiple generators?

Multiple-generator connection is not currently supported. Confirm the intended single-generator arrangement with Fox ESS before final design.

24. How long can the system provide backup?

Backup duration depends on the usable battery energy, reserve settings, conversion losses, temperature and actual load. Size energy and power separately: sufficient kWh for the desired duration does not by itself establish that the system can start or supply every load.


Installation and connectivity

25. Can H3 Plus and CQ7 be installed outdoors?

H3 Plus and CQ7 feature NEMA Type 4X protection for indoor/outdoor installation. Follow the installation manual for clearances, mounting and environmental conditions. The recommended inverter location is more than 1,000 m from the seashore; coastal projects require specific review.

26. Which internet connections are supported?

Wi-Fi and LAN connectivity are supported, with optional 4G using a separately purchased communication accessory. For the backup parallel configuration covered here, each inverter must be networked and configured individually.

27. Can the system use Starlink at a remote site?

Fox ESS EMS data transmission through Starlink has been tested successfully at a California customer site. Confirm the site network and selected EMS arrangement before deployment; this test is not a guarantee of connectivity at every location.

28. Can H3 Plus integrate with a third-party EMS?

Yes. H3 Plus supports the RTU protocol, and Fox ESS can assist with third-party EMS integration. Request the protocol documentation and agree the control functions, interface and integration scope before procurement.

29. What cable-length rules apply to parallel systems?

Communication cable runs must be less than 100 m from the meter to the master inverter and from the master to the farthest slave inverter. Without a parallel cabinet, power-cable length deviation between units must be less than 10%. The generator DI control cable limit is less than 500 m. Follow the installation manual for cable type, routing and electrical design.

30. Does every installation require a neutral?

Neutral requirements depend on the approved electrical topology and load arrangement. No-neutral operation requires an approved arrangement with balanced three-phase loads. High-leg delta and other nonstandard services need an engineered configuration; do not omit a neutral based solely on this FAQ.


Rogowski coil selection

31. Is a Rogowski coil set included with H3 Plus?

Yes. Each H3 Plus includes one 600 A Rogowski coil set as standard. No separate order is needed for this included set.

32. Which Rogowski coil set is needed for parallel operation?

A system with one or two H3 Plus inverters uses one shared 600 A Rogowski coil set. For three to five H3 Plus inverters in parallel, order one 3000 A Rogowski coil set separately.

33. Is an additional set needed when a PV inverter is connected?

Yes. If the system includes a PV inverter, order one additional 600 A Rogowski coil set. This is a separate requirement from the coil set selected for the H3 Plus parallel configuration.

34. How many H3 Plus inverters can the 3000 A set support?

The 3000 A Rogowski coil set supports metering for up to ten H3 Plus inverters. This is the metering configuration limit; it does not increase the supported backup/off-grid parallel limit. The North American backup configuration covered in this FAQ remains up to five inverters.


Project selection and support

35. Can I specify a 600 V or high-leg delta site?

The available voltage families are 208 V and 480 V. For 600 V service or 240 V high-leg delta, provide the site single-line diagram for engineering review before selecting equipment. Transformer requirements and suitability must be established for the actual site.

36. Is a DC fast EV charger included?

A DC-link interface is provided for potential integration, but a DC fast charger is not included in the standard North American package described here. Contact Fox ESS to review a compatible charger, required interface work and project-specific approvals.

37. Is full rated output available with any battery configuration?

No. Available output depends on battery module count, string configuration, current limits, state of charge and operating conditions. Specify required backup kW separately from the inverter model’s grid-tied nameplate rating, and obtain the approved output for the proposed configuration.

38. What warranty and certifications apply?

Request the warranty document and applicable certificates/listings for the exact inverter, battery and system combination being purchased. Warranty duration and certification scope are not established by this FAQ, and project acceptance must be checked for the installation location.

39. What information is needed for a proposal?

Provide the site address and target installation date; service voltage, phase arrangement, frequency and single-line diagram; main panel rating; interval load data and utility tariff; existing PV details; backup loads, motor-starting requirements and desired duration; generator details; export restrictions; and any third-party EMS requirement.

40. How do I confirm equipment availability and get support?

Contact your Fox ESS representative through us.fox-ess.com with the project information above. Confirm the exact equipment list, approved configuration and delivery schedule before placing an order. Model availability and project requirements vary.